9200/mint GENERAL Tech Notes

The following documentation applies to the use of the 9200 /mint:

• Comprehensive Owner's Manual (Version 2.0, October, 1998, for Windows98 & Windows NT users) in Word 97 format. If you don't have this version, you should download it.
• Word 97 Viewer for those who don't have Word 97
• Technical notes including FAQ's, trouble-shooting procedure, IRQ and IO address settings for CMOS setup and PCMCIA cards to use with Windows 95/98 and Windows NT.
• How to Install Windows 98 on the 9200 /mint.
• How to download and install the latest BIOS from Chicony
   

The following files are for use with the 9200 /mint:

NOTE: The links below will download a program file to your hard disk. After you have downloaded one of these program files, run it under Windows 95 or NT with a blank formatted disk in the A: drive, and the program will write the exact image of the floppy you need to that disk (including the boot sectors).

• 9200 /mint Setup Disk (model 978, socket 7 CPU's, AMD K6/K6-2 300mhz/333mhz)
• 
  Latest version as of 10-19-98. Includes new 1.20 version BIOS and PCMCIA drivers for Win95.
• 9200 /mint Setup Disk (model 978, socket 7 CPU's, Intel PentiumMMX / Tillamook 233mhz/266mhzz)
• 
  Latest version as of 10-19-98. Includes new 1.11 version BIOS and PCMCIA drivers for Win95.
• 9200 /mint Setup Disk (model 979, Intel Tillamook 266mhz-IMM module)
• 
  Latest version as of 05-15-98. Includes new 111T2E04 version BIOS.
• 9200 /mint Setup Disk (model 979, Intel Pentium II 266mhz/300mhz-IMM module)
• 
  Latest version as of 10-31-98. Includes new 1.22 version BIOS and PCMCIA drivers for Win95.
• V.90 internal modem driver

Note: The model identifier (978 or 979) can be found on the bottom of your notebook, at the top left corner of the identification sticker, after the words "Model No. MP-"

{NEOWEBSCRIPT ERROR: bad option "/usr/local/apache/./neowebscript/neoscript-data/users/d/dynamiscc/db/pagecounters.db: NONE": must be -code, -errorcode, or -errorinfo}

bad option "/usr/local/apache/./neowebscript/neoscript-data/users/d/dynamiscc/db/pagecounters.db: NONE": must be -code, -errorcode, or -errorinfo
    while executing
"return -code error "$dbFileName: $errorCode" $errorInfo"
    (procedure "SAFE_dbfetch" line 21)
    invoked from within
"dbfetch pagecounters /pcmint_ftp/9200/general/default.htm accessInfo"
    ("uplevel" body line 1)
    invoked from within
"uplevel $args"
    (procedure "slave_unknown" line 4)
    invoked from within
"dbfetch pagecounters $webenv(DOCUMENT_URI) accessInfo"
    (procedure "incr_page_counter" line 3)
    invoked from within
"incr_page_counter"
    ("uplevel" body line 1)
    invoked from within
"uplevel $args"
    (procedure "slave_unknown" line 4)
    invoked from within
"incr_page_counter"
    invoked from within
"$safeInterp eval $ssiCode"